The Anker Soundcore Boom 2 Plus is a bass-heavy Bluetooth speaker that I love for blasting party bangers

Anker Soundcore Boom 2 Plus: Two-minute review

The Anker Soundcore Boom 2 Plus is a Bluetooth speaker that does exactly what it says on the tin. It blasts onto the scene with booming bass output, high volume levels and blaring LED lights – this thing is by no means subtle! And at $249.99 / £199.99 / AU$359.99 it’s by no means cheap, either – so let’s find out if the Boom 2 Plus is worth the cash.

It only seems right to start with the main attraction: bass. With BassUp 2.0 activated you’re going to get deep pumping low-end output, ideal for genres such as EDM or hip-hop, and for occasions such as house parties. Without it, you may find that bass is a touch underwhelming, so it’s worth toggling it on for when you really want to ramp up any low-frequency audio. Still, I didn’t find the Anker Soundcore Boom 2 Plus could offer quite as ground-shaking bass as the Tribit Stormbox Blast 2.

All-round sound quality is up-to-scratch, too. I found mids and highs to be clear and free of tinniness – a big relief. On top of that, there’s a nine-band EQ so you can get a more neutral sound if that’s what you’re after. The Anker Soundcore Boom 2 Plus isn’t going to supply the phenomenal attention to detail that some of the best Bluetooth speakers can offer, but it does include the AAC codec this time around, so it's a little better for Apple users in particular.

This speaker comes with a nice set of features, all of which can be accessed via the free-to-download Soundcore app. You can pick from preset or custom EQ calibrations, toggle BassUp, and alter light settings. The LED lights attached to the side of the speaker can sync up to audio output for a more immersive listening experience, and watching them rumble as the speaker pumps bass is highly satisfying.

The lights were one of many features already included in the original Anker Soundcore Boom 2. Now, don’t get me wrong, the standard-sized model is a decent budget option, but the Boom 2 Plus is an upgrade in almost every way. You get more power – as much as 140W for hitting high volumes – a more curved, quality-looking design, and a strap for carrying the speaker over long distances.

But the Boom 2 Plus isn’t without its drawbacks. Of course, its far more expensive – yet still only has the IPX7 waterproof rating, meaning it still lacks a dustproof score. On top of that, the Boom 2 Plus actually offers less playtime than the standard Boom 2, with just 20 hours on offer. Now, that’s not too bad, but considering rivals like the Earfun UBoom X can muster 30 hours, you may be left wanting more.

But overall, the Anker Soundcore Boom 2 Plus is still an adept party speaker. You’re getting plenty of bass and plenty of ways to personalize both its sound and appearance. If you can grab it at a cut-price, I’d argue it's an option well-worth considering, but unfortunately there’s some really stiff competition in this price range. And if you’re able to stretch your budget a little bit further, I’d recommend going for the Tribit Stormbox Blast 2 instead, which ultimately packs more of a punch and better protection against the elements.

Anker Soundcore Boom 2 Plus review: Price and release date

• $249.99 / £199.99 / AU$359.99
• Launched in May 2024

The Anker Soundcore Boom 2 Plus is significantly pricier than the standard Boom 2 model, coming in with a list price of $249.99 / £199.99 / AU$359.99. That’s compared to the usual Boom 2’s launch price of $129.99 / £119.99 / AU$219.99. I’ve spotted it on sale for around $200 / £170, though, so keep your eyes peeled for a bargain.

This 2024-issued model is available in a number of color options – all of which cost the same. The colorways available to you are: Adventure Green; Explorer Green; and the variant I tested, Phantom Black.

Anker Soundcore Boom 2 Plus review: Specs

Anker Soundcore Boom 2 Plus review: Features

• Nine-band custom EQ
• Customizable LED lights
• 20-hour battery life is decent, but nothing special

In terms of features, the Soundcore Boom 2 Plus is almost identical to its standard-sized sibling. Button controls enable you to toggle on the low-end-boosting BassUp option, sift through light show settings and pair to a second speaker via PartyCast 2.0. And once again, there’s a USB-C port which enables the Boom 2 Plus to become a power bank.

If you download the Soundcore app, however, you get access to even more features. The standout is EQ adjustment, which grants access to a nine band equalizer and a small selection of presets: Soundcore Signature, Voice, Treble Boost and Balanced (as well as BassUp). I would maybe have liked to see a few genre-specific options, but there’s still plenty of customizability here.

The app also lets you personalize the Boom 2 Plus’ lights remotely. There are six effects available: Flash, Flame, Lightning, Scan, Cyclone and Bounce. On top of that, you can play around with a color wheel to get an even more tailored look to the speaker’s LEDs. The lights are on passive radiators which rumble violently during bass-heavy tracks, and this was enjoyable to watch, especially in dark rooms. They sync up to sound output, which makes for an immersive audiovisual experience, but if that’s not to your taste, you can switch them off entirely.

One benefit of going lightless is that you’ll save some battery life. And that might be useful, because the Soundcore Boom 2 Plus actually offers less playtime than the standard Boom 2. That’s a little disappointing and given rivals such as the Earfun UBoom X can serve up an impressive 30 hours, its fair to say this speaker’s battery life is a bit unimpressive. 20 hours is by no means bad, but it’s worth noting that BassUp – like the lights – will contribute to faster drainage.

One thing you do get over the standard edition, however, is an aux-in port, which enables wired listening – pretty neat. Otherwise, you’ll be relying on Bluetooth 5.3, which is plenty good enough, and there’s also Google Fast Pair for a speedy setup.

• Features score: 4/5

Anker Soundcore Boom 2 Plus review: Sound quality

• Booming bass with BassUp 2.0 on
• But won’t offer massively sophisticated all-round audio
• Impressive volume levels thanks to max 140W power output

Just by hearing this speaker's name, you probably know exactly what you’re going to get here. And if you guessed big, booming bass – congrats, you were right. Well, that is if you have BassUp 2.0 turned on – without this bass isn’t actually that impactful for a speaker of this size. But don’t get me wrong, having BassUp 2.0 on will definitely mean the low-end soaks up most of the limelight. For a party speaker, though, that’s not necessarily a bad thing.

When tuning in to Favorita by kryptogram, I was impressed by the speaker’s bass output with impactful, deep drum kicks instantly grabbing my attention. Similarly when listening to a house track, Dasha - Tour Maubourg Remix by Fusion Affair, the speaker showcased solid low-frequency response, with dominant, pumping bass. When I threw on Diva Bonita by bbno$, the track’s imposing sub-bass came through with authority, something that you’ll miss out on from a lot of cheaper models.

When I put the Boom 2 Plus next to the Tribit Stormbox Blast 2, however, I did find the latter offered considerably weightier power in the low end – even with its XBass feature turned off. Of course, that model is a little more expensive, but if you want ultimate bass performance, I’d recommend it over this Soundcore speaker.

Regardless, the Boom 2 Plus can get very loud. That’s in part thanks to its high maximum power output of 140W – 100W of which comes from the two 50W woofers, with the remainder stemming from the speaker’s dual 20W tweeters. Pair that with the Boom 2 Plus’ competence in the bass department and you’re looking at a speaker that’s primed for parties or outdoor events, where you want to power through excess noise.

If you want a speaker capable of delivering a highly nuanced listen, though, this isn’t a top option. Sure, you get AAC this time (meaning any tracks played in AAC on a compatible device will be played without conversion or other inteference – most notably for Apple Music users on Apple devices) rather than SBC (the standard Bluetooth codec) alone, and there’s a nine-band equalizer that can help you tune a more balanced sound – but I still found there was a lack of detail, particularly in the mid and treble frequency range.

When listening to I Want You by Molko, I wasn’t struck by a true-to-life cymbal crash or particularly natural-sounding, breathy vocals. The speaker also wasn’t highly capable of managing this track’s densely layered mix, so you may want to turn to a model like the Edifier D32 if you’re looking for stronger instrument separation.

Of course, that’s not something this model has to excel in. Ultimately, this is designed to be a party speaker that leans into its low-frequency talents and it does that well. Also, even if they’re lacking a bit of detail, mid-range and treble frequency sounds rarely sound tinny or harsh, even at higher volumes. I also found that I could get a fairly balanced sound profile out of this speaker after turning BassUp off in Soundcore Signature and slightly tweaking EQ.

• Sound quality score: 4/5

Anker Soundcore Boom 2 Plus review: Design

• More curved, premium looking design this time out
• Still only IPX7 rated
• Eye-catching LED lights

In terms of looks, the Soundcore Boom 2 Plus is a huge upgrade on its standard-sized sibling. It’s less stubby and blocky looking, now donning a wider, more curved look. On top of that, the metallic speaker grille has a more premium feel and appearance, creating a far cleaner aesthetic overall.

Of course, much has remained the same – the LED lights on the side of the speaker are still bold and vibrant – they can also sync up to bass output for a more immersive listening experience. And the button controls on top of the speaker are again well-proportioned, clear and responsive.

But with this speaker’s added length comes added bulk – meaning Anker has had to make a change here. That’s right: this model comes with a strap included, which can be attached to hooks on the handle. This is pretty basic; there’s no shoulder pad or anything, but it’s still a nice addition if you’re going to carry the Boom 2 Plus over longer distances. This is also welcome as the Boom 2 Plus is more than twice as weighty as the standard model, coming in at 8.4lbs / 3.8kg – though this is still fairly lightweight overall.

Something that, perhaps disappointingly, has remained much the same, though, is this speaker’s ingress rating. Like the standard Boom 2, this is IPX7 rated. Now, the positive here is that the speaker can be submerged in up to a meter of water for as long as 30 minutes – something we’d expect from all of the best waterproof speakers. It's floatable too if you want to take it into the pool with you, for instance.

The bad? This thing skips on a dustproof rating again, meaning it might not be the best beachside companion. If you want a more rough and ready model, look for the IP67 rating, which a ton of competitors have, including the fantastic Bose SoundLink Max.

But enough moaning. I did like the small rubber tab on the reverse side of the Boom 2 Plus. Simply flick this up or down and you get access to the USB-C charging port – which can be used to charge the speaker or external devices – as well as the aux-in if you want wired listening.

I was also a fan of the multiple color options available. You can grab the Boom 2 Plus in Phantom Black, Explorer Blue or Adventure Green – all of these look neat and are discreet enough to bring out the best of light features in dark rooms.

• Design score: 4/5

Anker Soundcore Boom 2 Plus review: Value

• Considerably more expensive than standard model
• But does offer improved audio and design
• Unfortunately rivals offer better bang for your buck

The Anker Soundcore Boom 2 Plus has a list price that’s almost double that of the standard model. So, with added price, you’re going to expect a massive improvement. Do you get that? In many ways, yes. I would argue that this model is far better looking and, perhaps unsurprisingly, has bassier, cleaner audio. If you want an all-out party speaker, it’s no contest – the Boom 2 Plus is far superior.

At the same time, you get a smaller battery life and there are some lingering issues such as the lack of a dustproof rating. Perhaps a larger problem for the Boom 2 Plus, though, is that it’s sitting in an awkward spot price-wise. If you go cheaper, you can grab the Earfun UBoom X, which also packs plenty of bass, as well as highly customizable audio. And if you can push your budget just a little more you can get the mighty Tribit Stormbox Blast 2, which is a top-tier party speaker in my book – it can also double up as a karaoke machine if you’re into that kinda thing!

In its own right, though, the Soundcore Boom 2 Plus is still a solid Bluetooth speaker and plenty good enough to keep the party moving. If you can get it for less than $200 / closer to the £150 mark, it’s a model well worth considering. Nonetheless, there is some stiff competition, which can’t be ignored.

• Value score: 3.5/5

Should I buy the Anker Soundcore Boom 2 Plus?

Buy it if...

Don't buy it if...

Anker Soundcore Boom 2 Plus review: Also consider

Anker Soundcore Boom 2 Plus review: How I tested

• Tested over the course of one week
• Mainly used at our music testing facility at Future Labs
• Predominantly listened to tracks via Tidal

I listened to the Anker Soundcore Boom 2 Plus for hours at our music testing facility at Future Labs. I blasted a bunch of tracks from my own music library alongside tunes from the TechRadar testing playlist, which we use to assess audio performance across a variety of genres. I connected to the Stormbox Blast 2 with the Samsung Galaxy S24 FE and mainly listened to songs via Tidal.

Further to this, I played a podcast episode on Spotify and watched video content on YouTube in order to assess vocal clarity across different platforms. When appropriate, I used the Tribit Stormbox Blast 2 to compare elements like sound, design and ease of use.

• First reviewed: February 2025
• Read more about how we test