3D printing explained: what's all the fuss about?

3D printing explained
Complex prototyping is easy with the right 3D printing kit, such as the Replicator 2

It's rare that a truly new technology comes along, promising to revolutionise the world. Just as the printing press and spinning jenny empowered cottage industries with the ability to spread knowledge and manufacture goods, 3D printers promise to enable a next-generation industrial revolution of home-made and customised products.

In the industrial world, 3D printing is known as Additive Layer manufacturing, which should give you a hint as to how the process works. Thin layer after layer of material is built up, in a way that means a final fully-formed widget, hip bone, gun or part is produced.

It contrasts with traditional machine lathing, which has garnered the name Subtractive manufacturing, because material is removed to make a final part.

How to print in 3D

So how can you get started with 3D printing to become part of the revolution? The short and sweet answer is you'll need a 3D printer, suitable material for that printer, a 3D model to print and suitable software to do just that. Some of the big names in 3D printing are MakerBot, Up! Plus, Afinia and the most affordable RepRap design.

The MakerBot Replicator 2 is one of the best known 3D printers on the market, with a price tag of £1,800 / US$2,200 / AU$2,685, while 1kg (2.4lbs) of print filament costs around £52 / US$48 / AU$66. The MakerBot Replicator 2 has a print layer resolution of 0.1mm or 256dpi.

3D printing explained

The UP! Plus is another well known printer

In old-school print terms this sounds almost archaic, but this is more than fine enough to print perfectly smooth, curved objects that can be as large as 285 x 153 x 155mm (11.2 x 6 x 6.1 inches).

The Up! Plus 2 printer is a good contrast because it retails for US$1,650 (around £1,055 / AU$1,735) and has a 0.15mm or 166dpi resolution and maximum print volume of 140mm cubed.

Cheap 3D printers

In the popularity stakes, RepRap tends to win, largely because it's the cheapest brand on the market, with self-build kits starting at around £400 / US$600 (around AU$660).

It's rather dubiously known as the 3D printer that can print itself, which is really a half-truth, since only a number of connecting parts can be created this way. The rest are metal rods and electrical components, but it's a clever sell and most designs can be built entirely at home with basic DIY tools and materials.

What really makes the RepRap interesting is it's very much an open source design. This has enabled a number of alternative designs to spring into existence from the RepRap Mendel original.

3D printing explained

The classic RepRap Mendel 3D printer

For example the RepRap Wallace is a smaller lower-cost design, while the RepRap Prusa Mendel is a larger but easier and cheaper-to-build version.

A criticism of all these RepRap variants is the wedge-frame base design, so a popular alternative to this is the RepRap Prusa i3 that uses a more rigid box frame. While the MendelMax 2.0, which is going through its beta design phase, is gaining attention as the latest iteration of that popular RepRap design.

Common to all these printer types are print materials. To produce prints these lower-cost 3D printer units generally use acrylonitrile butadiene styrene (ABS), polylactic acid (PLA) or another member of the thermoplastic polymer family, usually supplied by the kilogram in a spools of 1.5mm thick wire, usually in a choice of different colours. As we've already said though, it's not cheap stuff.

Starting to print in 3D

Printing itself depends very much on the 3D printer you've chosen. Pre-built models such as the UP! Plus and MakerBot Replicator 2 are on the whole standalone and ready-to-go out of the box. The RepRap variants tend to be based on the Arduino USB control system, so need to be configured and run from a PC.

Typically getting a RepRap-based device up and running requires a good number of steps. These starting with installing the Arduino USB driver and development environment for the USB interface. Interfacing, communicating and supplying suitable 3D models to the RepRap requires a suite of tools. Many are built on the Python programming language, so you'll need the right build from Python.org, which is often version 2.7.

Latest in Pro
Finger Presses Orange Button Domain Name Registration on Black Keyboard Background. Closeup View
I visited the world’s first registered .com domain – and you won’t believe what it’s offering today
Racks of servers inside a data center.
Modernizing data centers: an efficient path forward
Dr. Peter Zhou, President of Huawei Data Storage Product Line
Why AI commonization is so important for business intelligent transformation and what Huawei’s data storage has to offer
Wix automation
The world's leading website builder aims to save businesses time with new tool
Data Breach
Thousands of healthcare records exposed online, including private patient information
China
Juniper patches security flaws which could have let hackers take over your router
Latest in News
Apple iPhone 16 Pro HANDS ON
Leaked iPhone 17 dummy units may have given us our best look yet at all four models
A super close up image of the Google Gemini app in the Play Store
It's official: Google Assistant will be retired for phones this year, with Gemini taking over
Quordle on a smartphone held in a hand
Quordle hints and answers for Sunday, March 16 (game #1147)
NYT Strands homescreen on a mobile phone screen, on a light blue background
NYT Strands hints and answers for Sunday, March 16 (game #378)
NYT Connections homescreen on a phone, on a purple background
NYT Connections hints and answers for Sunday, March 16 (game #644)
Three iPhone 16 handsets on show
Apple could launch an iPhone 17 Ultra this year – but we've heard these rumors before